Shanyo Supplies Raised-Legend Silicone Keypads For Accessibility And Industrial Panels

Nov 16, 2026

Leave a message

John Smith
John Smith
Specializing in metal dome array technology, I work as an engineer at Qingdao Shanyo Precision Electronic Technology Co., Ltd. With over 5 years of experience, I focus on developing innovative solutions for mobile device components. Follow me to explore the latest advancements in precision electronics!

A food-and-beverage line builder came back after a production run of silicone keypads failed in service. The panels controlled washdown stations and conveyor settings, and operators wore work gloves through most of the shift. The legends were screen-printed on the silicone face. Within a few months the printed marks rubbed off against gloves, cleaning cloths and repeated finger contact, and crews began guessing which key started the wash cycle and which stopped the line. The keys themselves still actuated; the readable marks on them had worn away.

We reviewed the keypad with the customer and moved the legend from a printed layer on top to a method that survives glove contact, cleaning and wear. This release covers the four legend methods we supply on silicone keypads: screen-printed legends, laser etching, two-shot molding and raised braille-style dots. It compares them on wear resistance, tactile read, glove operation, cost and accessibility, and maps each method to industrial, medical, public-access and consumer panels.

The legend sits on the key face while the contact below may use metal domes, a dome sheet array or carbon pills. The legend method and the contact design are specified together: a durable mark does not help if the key feedback or contact fails, and a good contact still frustrates the operator if the mark wears off.

Why legends wear off a silicone keypad

Silicone rubber is soft and flexible, which gives the keypad its comfortable travel and long life, but it also means a printed layer on the surface takes wear from fingers, gloves, cleaning agents and repeated contact. A screen-printed legend sits on top of the rubber; once that thin ink layer abrades, the mark disappears. A legend that is part of the molded material, etched into the top layer, or raised as a tactile feature resists that wear because the mark is not a separate coating that can peel off.

Wear is not the only requirement. In industrial and public panels, operators often work with gloves, so the key must be readable by touch as well as sight. In accessibility devices, raised dots and shapes carry the meaning for users who cannot read the face. In washdown and medical environments, the legend must hold up to disinfectants and moisture without fading. The legend method balances these conditions against the part cost and the production volume.

Industrial silicone keypad panel
A worn keypad loses its readable marks first: the legend method decides whether the meaning survives glove contact, cleaning and repeated actuation over the panel's service life.

Comparison: printed vs etched vs two-shot vs raised dots

Parameter Screen-printed legend Laser etched Two-shot molded Raised braille dots
Wear resistance Lowest, ink rubs off Good, mark in top layer Best, color part of material Best, tactile raised feature
Tactile read None, sight only None, sight only None to slight by shape Readable by touch
Glove operation Mark wears under gloves Mark holds under gloves Mark holds under gloves Touch locates the key
Cleaning / chemicals Ink can fade or lift Resists surface cleaning Resists cleaning well Resists cleaning well
Relative cost Lowest, simple print Moderate, laser step Highest, two-shot tooling Moderate, mold features
Best fit Low-wear consumer keypads General industrial panels Long-life high-wear panels Accessibility and glove panels

Dome contact under the key
Under each key, the dome or pill provides the tactile click; the legend on the face carries the meaning, and both must hold up over the keypad's cycle life.

How each legend method behaves

Screen-printed legends print ink onto the cured silicone face after molding. It is the lowest-cost method and the easiest to change between designs, and it gives a clean printed mark on a low-wear panel. Its weakness is wear: the ink sits on the soft surface and rubs off under gloves, repeated finger contact, cleaning cloths and chemicals. It suits consumer remotes, low-use keypads and panels where wear and cleaning are light.

Laser etching burns or abrades a dark top coating to reveal a lighter silicone below, or marks the surface directly. The legend is held in the top layer rather than a separate ink film, so it resists rubbing and cleaning better than printing. It reads by sight, not touch, and the contrast depends on the two-layer color design. It suits general industrial and instrument panels that see moderate wear and cleaning but do not need tactile read.

Two-shot molding molds the legend color as part of the silicone material itself, often a darker body with a lighter legend or a second material over the key. The mark cannot rub off because it is not a coating; it carries the longest wear life and holds up to heavy glove contact and washdown. Its cost is higher: two-shot molding needs tooling and a second material, and it pays back on long-life, high-wear panels.

Raised braille-style dots and shapes mold small raised features onto or beside the key so the operator locates and identifies the key by touch. It serves accessibility users and gloved or low-light operation where sight reading is unreliable. The dots are part of the molded key, so they hold up to wear, and they are often combined with a sight legend for dual read. It suits accessibility terminals, public keypads, glove-operated industrial panels and equipment used in dark conditions.

Matching the method to the panel

Industrial and washdown lines - two-shot or laser etched; raised dots where gloves dominate. Conveyor controls, wash stations and machine pendants see gloves, cleaning and heavy cycles. Two-shot legends survive the longest wear; laser etching covers moderate wear at lower cost; raised dots let gloved operators locate keys without looking at the face.

Medical devices - etched or two-shot to hold disinfectant cleaning. Patient keypads and handheld instruments are wiped with disinfectants that can lift printed ink. Etched or two-shot marks resist the chemical cleaning, and raised dots can guide touch operation on bedside or accessibility devices.

Public-access and accessibility terminals - raised dots with a sight legend. Kiosks, intercoms and accessibility keypads serve mixed users; raised braille features carry the tactile meaning while an etched or printed sight legend serves sighted users. The two are designed together so the panel works for both.

Consumer electronics - printed legends where wear is light. Remotes, small handhelds and low-use keypads balance cost against the light wear they see; printing keeps the part inexpensive, and etched or two-shot marks are reserved for consumer products that expect heavy use.

Key shape, tactile feedback and legend position

Beyond the legend method, the key shape itself helps identification. Raised rims, concave faces, different key heights and shaped keycaps let fingers distinguish keys by feel, which complements the legend. The actuation force and travel under the key set the feedback; a tactile dome click confirms the press. The legend is placed where the finger rests, and raised dots are positioned so they do not interfere with the contact travel or the key's return. On a multi-key panel, the most-used keys get a tactile marker while the rest carry sight legends.

Selection checklist for keypad legends

1. How much wear the face sees. Glove contact, repeated pressing and cleaning push toward etched, two-shot or raised features; light finger use can take printing.

2. Cleaning chemicals and washdown. Disinfectants, water and oils can lift printed ink. Chemical-resistant methods are selected to the panel's cleaning regime.

3. Tactile or accessibility need. Gloved, low-light or visually impaired operation calls for raised dots or shaped keys; sight-only methods do not serve touch reading.

4. Color contrast and lighting. The legend must contrast against the key face in both daylight and low light. Etched and two-shot colors are checked against the panel lighting.

5. Cost and production volume. Printing is cheapest and easiest to change; two-shot carries tooling that pays back at volume. Match the method to the run size and service life.

6. Key count and layout. Frequent keys get tactile markers; the full legend set follows the panel's use. Dots and shapes are placed clear of the contact travel.

Common mistakes buyers make

The first mistake is printing legends on a high-wear panel. The food-line keypad failed this way: ink rubbed off under gloves and cleaning until operators could not read the keys.

The second mistake is choosing a sight-only legend for a gloved or dark panel. Operators working without looking at the face need a tactile feature; a printed or etched mark cannot be read by touch.

The third mistake is ignoring chemical cleaning. An ink that looks fine on the bench lifts after repeated disinfectant wipes; the legend method must hold the panel's actual cleaning agents.

The fourth mistake is putting raised dots where they interfere with travel. A dot molded too high or over the contact changes the key feel and can wear unevenly; the feature is sized to the key geometry.

The fifth mistake is skipping a wear sample. Legends that look crisp on a new sample may fade after cycles and cleaning. A prototype through actuation and cleaning confirms the mark holds before production.

What Shanyo supplies and tests

At Shanyo we manufacture custom silicone keypads with printed, laser-etched, two-shot and raised-dot legends, matched to the panel's wear, cleaning, tactile and accessibility requirements. The keypad integrates domes, pills, membrane switch contacts and LED backlighting where the panel needs it. We check legend contrast, tactile feel and wear on the prototype, and sample keypads ship within 48 hours of the drawing freeze.

Shanyo supplies wholesale and OEM silicone buttons, dome arrays, membrane switches and FPC assemblies from our Qingdao factory. Send us the panel's wear and cleaning conditions, the glove or accessibility need, the color and lighting target, the key layout and the contact type, and our engineering team will recommend the legend method and quote factory pricing. Contact Shanyo for a raised-legend keypad sample.

Silicone colors, ink and two-shot materials

The legend contrast starts with the silicone color. A dark body with a light legend, or a light body with a dark mark, sets the reading contrast before any wear condition is considered. Screen printing uses a compatible ink bonded to the cured silicone; ink adhesion and flexibility matter, because a brittle ink cracks as the key flexes. Laser etching relies on a two-layer color structure: a darker top coating over a lighter base, so removing the top layer exposes the contrast below. Two-shot molding bonds a second silicone color or material to the key body during molding, so the legend color is distributed through the material rather than sitting on one surface.

Material choice also affects the legend. A softer, lower-durometer key flexes more and can wear a printed ink faster than a firmer key. Color pigmentation, matte or glossy face finish and any texture on the key change how the legend reads and how it holds up. The legend method is chosen against the durometer and face finish, not after the keypad is already molded.

Braille standards and tactile feature design

Where raised features serve accessibility, dot size, spacing and height follow tactile readability rather than decoration. Braille cells use raised dots of a defined diameter, height and spacing so a finger can read the pattern; plain marker dots that locate a key follow similar tactile dimensions. The raised feature must be tall enough to feel but low enough not to interfere with key travel, and it must mold cleanly without burrs or flash that catch on a fingertip. Symbols, arrow shapes and raised rims can mark common keys without a full braille cell. The tactile layout is reviewed against the panel's expected users before the mold is cut.

Wear testing, cleaning and production approval

Before a keypad goes to production, we actuate a prototype through the target cycle count and run the legend through the panel's cleaning agents and wiping cycles to confirm the mark does not fade, lift or blur. Contrast is checked under the panel's lighting, and raised features are read by touch for shape and spacing. The drawing records the legend method, body and legend colors, ink or two-shot material, dot dimensions and the wear and cleaning tests passed, so a later reorder keeps the same readable keypad.

For buyers comparing suppliers, the durable legend is part of the keypad value, not an add-on decided after the base key. A low printed price that fades in months costs more over the panel life than an etched or two-shot mark that lasts the service period. Reviewing the wear condition, cleaning regime and tactile need up front keeps the legend method matched to the actual use.

- John Smith, Senior Application Engineer, Shanyo Precision Electronics, Qingdao

Send Inquiry