The early morning sun streamed through the high windows of Shanyo's factory, casting light on the shiny production equipment. A team of clients from Japan, accompanied by the general manager, began an on - site inspection of the metal dome production base.
The group first headed to the stamping workshop. In the operation area separated by transparent glass, precision machine tools were stamping stainless steel coils at high speed, and the formed metal snap dome moved orderly along the conveyor belt. The client representatives picked up magnifying glasses to carefully observe the edges of the products, occasionally measured the thickness with calipers, and kept communicating with the accompanying engineers about the stamping precision control standards.
In the testing center, automated optical inspection equipment was scanning each metal dome for surface finish and arc errors. "Our inspection precision reaches 0.01 millimeters, and the pass rate of each batch of products is stably above 99.8%," the quality inspection supervisor explained, pointing to the real - time data on the screen. The client team paid special attention to the high - and low - temperature environment testing links. When they saw that the metal snap dome, which had undergone 5000 pressing tests, still maintained good elasticity, the leading purchasing director showed an approving expression.
Subsequently, the clients went to the assembly workshop to watch the assembly process of the dome sheet. Workers in the clean room accurately attached the metal dome to the PET film according to the design drawings, wearing anti - static wristbands throughout. "This automated fitting process can avoid errors caused by manual operations," the production manager said. "The metal dome products we customized for medical equipment clients have achieved zero - defect delivery through this system."
At the symposium, the client team raised questions about production standards and raw material traceability. The technical director answered them one by one and showed the metal dome fatigue test reports issued by third - party laboratories. When leaving, the client representative held the general manager's hand and said, "The on - site inspection has made us more confident in the cooperation, and we look forward to promoting the follow - up orders as soon as possible."