Shanyo Ships Anti-Fingerprint Membrane Switch Overlays For Public Kiosks

Nov 07, 2026

Leave a message

John Smith
John Smith
Specializing in metal dome array technology, I work as an engineer at Qingdao Shanyo Precision Electronic Technology Co., Ltd. With over 5 years of experience, I focus on developing innovative solutions for mobile device components. Follow me to explore the latest advancements in precision electronics!

A European public transit operator came to us with a ticket kiosk that was failing its monthly cleaning. The kiosk used a plain polycarbonate overlay on a membrane switch, and within two months the faceplate was a mess of fingerprint smudges, ticket grease and disinfectant wipes. The operators could not read the key labels, passengers mistook the smudged keys for out-of-service, and the maintenance team was replacing overlays every eight weeks.

We swapped the overlay to a polycarbonate faceplate with an anti-fingerprint hard coating. The AF coating makes the surface oil-repellent, so fingerprint wipes clean with a dry cloth, and the disinfectant wipes do not haze the polycarbonate. The kiosk went from an eight-week overlay replacement to a six-month cleaning cycle. That project is the subject of this release. When you design a membrane switch for a public kiosk, a hospital nurse station or an access-control panel that hundreds of hands touch every day, the faceplate coating matters as much as the switch itself.

This release compares plain PC and AF-coated overlays on cleaning, wear, cost and application, and maps each to the environment it suits.

Why a plain PC overlay smudges

A standard membrane switch overlay is printed on 0.175mm or 0.25mm polycarbonate. The PC is clear, takes the print well, and is cheap. But the surface is not treated. Oil from a finger, grease from a ticket, or the alcohol in a disinfectant wipe sits on the surface and bonds to the PC. Over weeks, the faceplate becomes a cloudy film of fingerprints and residue. The printed key labels underneath haze over, and the panel looks old before it is used out.

An anti-fingerprint overlay adds a hard-coated surface on the PC. The coating is an oleophobic layer that makes oil and water bead up instead of spreading. A fingerprint wipes off with a dry cloth, an alcohol wipe leaves no haze, and the printed labels stay crisp. The overlay is still the same 0.175mm or 0.25mm PC, still printed with the same graphics; the difference is the top coat.

Membrane switch overlay with AF coating
The anti-fingerprint hard coat on the polycarbonate overlay makes oil and alcohol wipe off without hazing the printed labels.

Plain PC vs AF-coated overlay: comparison table

Parameter Plain PC overlay AF-coated PC overlay
Thickness 0.175mm / 0.25mm 0.175mm / 0.25mm
Fingerprint Bonds, smudges Beads, wipes clean
Alcohol wipe Hazes over time No haze
Wear resistance Prone to scuffs Hard coat resists scuffs
Cleaning cycle 8-12 weeks 6-12 months
Relative cost Lower Slightly higher
Best fit Low-touch indoor Public, healthcare, high-touch

How the AF overlay is built

The AF overlay starts with the same polycarbonate and the same screen-printed graphics the customer already uses. On top of the printed layer, we apply an anti-fingerprint hard coating that is cured to the PC. The coating is oil-repellent, so a finger leaves a bead that wipes away, and the coating resists the alcohol in disinfectant wipes without hazing. The metal domes underneath are unchanged, the tactile feel is unchanged, and the overlay thickness stays the same. The AF coat is on the surface the user touches.

Four-legged domes under overlay
The domes and the printed labels are unchanged; the AF hard coat on the top surface is the difference between a clean kiosk and a smudged one.

Which overlay for which environment

Consumer electronics, home appliances, low-touch indoor - plain PC. A TV remote, a microwave fascia or a home thermostat with one household touching it once a day uses a plain PC overlay. There is no constant cleaning, no disinfectant, and the lower cost fits consumer volumes. This is the rare case where plain is the right answer.

Public kiosks, ticket machines, access control - AF-coated. A transit kiosk, a ticket vending machine or an access-control panel that hundreds of hands touch every day needs the AF coat. The transit operator's eight-week overlay replacement cycle dropped to six months after the swap. This is the construction that fixed our customer's smudged kiosk.

Hospital nurse stations, doctor's offices, clinics - AF-coated. A medical panel wiped down with alcohol multiple times a day needs the AF coat. Plain PC hazes under repeated alcohol, and the labels fade. The AF coat survives the wipe cycle without haze.

Office copiers, factory panels, single-shift use - plain PC. An office copier or a factory panel touched by a small crew uses a plain PC overlay. The AF coat adds cost where the panel is not wiped by a crowd.

Selection checklist

1. Touch frequency. If the panel is touched by more than a few people a day, AF-coated. If it is a household device, plain PC.

2. Disinfectant exposure. If the panel is wiped with alcohol or disinfectant, AF-coated. Plain PC hazes under repeated alcohol.

3. Cleaning cycle target. If the maintenance team wants a six-month cleaning cycle, AF-coated. If eight weeks is acceptable, plain.

4. Overlay thickness. The AF coat does not change the 0.175mm or 0.25mm thickness. Specify the thickness to the panel, not to the coat.

5. Cost vs maintenance. The AF coat adds a small per-piece increase, but a smudged kiosk pulled from service for cleaning is a far larger cost than the coat.

Common selection mistakes

The first mistake is specifying a plain PC overlay for a public kiosk. The transit operator's eight-week replacement cycle started exactly this way. The PC bonds to fingerprint oil and alcohol, and the panel looks old in weeks. For a public kiosk, the AF-coated overlay.

The second mistake is specifying an AF coat on a home thermostat where no one wipes the panel. The coat adds cost where there is no oil to repel. Match the coat to the environment.

The third mistake is thinking the AF coat changes the dome feel. It does not. The domes, the force and the stroke are unchanged. The coat is on the surface the eye sees and the finger touches.

The fourth mistake is specifying a thin overlay for a high-wear public kiosk. A public panel takes a beating; use 0.25mm PC with the AF coat, not 0.175mm.

What we supply and test

At Shanyo we produce membrane switches with plain or AF-coated PC overlays, in 0.175mm or 0.25mm thickness, with the same stainless steel dome sheet arrays underneath. AF overlays are tested for alcohol wipe resistance and for fingerprint repellency, and the test report ships with the order. Prototype AF overlays ship within 48 hours from a drawing.

Shanyo manufactures custom OEM and wholesale membrane switches for public, medical, industrial and consumer products, with ISO 13485 supporting medical programs and IATF 16949 covering automotive. Send us your touch frequency and cleaning cycle, and our engineering team will recommend the plain or AF-coated overlay and quote factory pricing. Contact Shanyo for a sample AF-coated membrane switch and a wipe test on your panel.

Cost trade-off, stated plainly

A plain PC overlay is the lower-cost part because the faceplate is untreated polyester. An AF-coated overlay adds a small per-piece increase because of the hard-coat process. On a twenty-button transit kiosk, the gap between plain and AF is a fraction of the finished kiosk cost.

The mistake buyers make is reading that gap on the quote and specifying plain PC everywhere. The correct comparison is the cost of a smudged kiosk: a ticket machine pulled from service for cleaning, an operator replacing the overlay every eight weeks, and passengers mistaking a smudged panel for out-of-service. One avoided service event pays for the AF coat on hundreds of kiosks. For a home thermostat with no public traffic, the plain PC overlay is the right economic choice.

There is also a thickness consideration. The AF coat adds no measurable thickness. The overlay stays 0.175mm or 0.25mm, so the panel stack-up is unchanged. Specify the AF coat against the cleaning environment, not against a generic minimum thickness.

What we ask for before recommending a coat

To recommend plain or AF, we need three inputs: how many hands touch the panel each day, whether the panel is wiped with alcohol or disinfectant, and the cleaning cycle the maintenance team targets. With those three numbers we can rule out the wrong coat immediately. Missing the touch-frequency input is the most common reason a first overlay comes back smudged, because the buyer specified plain PC for a public kiosk without telling us about the crowds.

Life and field reliability

The AF coat does not change the dome life or feel; it adds a layer that resists oil and alcohol. An operator pressing the panel feels the same click. Over the product life, the hard coat stays clear because it is cured to the PC, not sprayed on. For a public kiosk expected to run for years, the AF-coated overlay is the cheaper choice over the product life, even if the per-piece cost is higher on the quote.

AF coat test and wipe detail

Beyond the hard coat, we test each production lot against repeated alcohol wipes and a fingerprint repellency check. The wipe test runs a 70 percent isopropyl alcohol cloth over the overlay for a set number of cycles, and the overlay must stay clear with no haze and no print wear. The fingerprint check applies an oil simulant and confirms it beads and wipes away. The test report ships with the order, so the buyer sees the coat confirmed before shipment.

The AF overlay is not a generic catalog part; it is tuned to the graphics, the colors and the print process of the customer's panel. We work with the customer's artwork to apply the coat over the printed layer so the colors stay true and the labels stay legible. Without that coordination, the coat can change the look of the print. This is the detail that most often gets missed on a first prototype.

Sample and trial

For buyers who need a feel before tooling, we ship a sample AF-coated membrane switch, so the customer can wipe it with alcohol, press it with oily fingers and clean it on the bench. The sample ships free for qualified public and healthcare programs with a defined panel design.

Where the AF overlay is the wrong choice

To make the decision concrete: do not specify an AF-coated overlay on a home thermostat where no one wipes the panel, where the coat adds cost and thickness for no benefit. Do not specify a plain PC overlay on a public transit kiosk touched by hundreds of hands, where the oil and alcohol smudge and haze the faceplate. Do not apply the AF coat without coordinating it with the printed graphics, where the coat changes the color. And do not specify 0.175mm PC on a high-wear public kiosk, where the thin panel scuffs. These four rules cover the majority of overlay coating mistakes we see returned from the field.

We also supply the AF overlay integrated into a complete silicone button assembly or a FPC module, depending on how the panel is built. Send us your panel drawing and touch frequency, and we will recommend the plain or AF-coated overlay within one working day. Prototype AF overlays ship within 48 hours from your drawing. Wholesale and OEM orders welcome, and we support volumes from prototype to mass production. Buy direct from the factory and get the faceplate clean the first time.

The transit operator's kiosks are still in service, six months after the AF overlay swap. The maintenance team now does a monthly wipe instead of an overlay replacement, and the passenger complaints about smudged panels stopped. We look forward to your project.

If you are replacing a smudged overlay on a public kiosk, a hospital nurse station or an access-control panel, send us a photo of the current faceplate and the cleaning cycle. We will tell you within a day whether the AF coat solves it, and ship a sample for the bench.

We look forward to hearing from you.

Sincerely, the Shanyo team.

Best regards.

Thank you.

Thank you very much.

- John Smith, Senior Application Engineer, Shanyo Precision Electronics, Qingdao

Send Inquiry